Aeotec Joins Works with Home Assistant With 9 Devices

Aeotec has officially joined Works with Home Assistant, bringing nine certified devices into Home Assistant’s compatibility program. The announcement, published on Home Assistant’s blog on November 18, 2026, covers a lineup of sensors, switches, a siren, and a smoke detector upgrade — including five devices that use Z-Wave Long Range, the standard’s newest addition, to reach up to a kilometre from your hub.

For a company that has been building Z-Wave hardware since 2006, the certification is less an introduction than a long-overdue handshake: plenty of Home Assistant users have already been running Aeotec gear through the Z-Wave integration for years. Now the devices carry the program’s stamp, which means they have been tested in-house by the Home Assistant team and come with a commitment to long-term support and firmware updates.

What Aeotec brings to the program

The nine certified devices span most of the jobs a smart home sensor network is asked to do:

  • Door Window Sensor 8 (ZWA055) — a contact sensor for doors and windows, available in Europe and the USA.
  • MultiSensor 8 (ZWA066) — the successor to Aeotec’s popular MultiSensor 6 and 7, combining motion sensing with light, temperature, humidity, and dew point readings, plus tamper and vibration sensing.
  • Water Sensor 8 (ZWA056) — a leak detector for basements, kitchens, and anywhere water can quietly do damage.
  • aërQ 8 Temperature and Humidity Sensor (ZWA057) — a dedicated climate sensor for rooms where heating and cooling need fine-tuning.
  • SmokeShield (ZWA050) — an upgrade for existing smoke detectors that brings them into the smart home.
  • Pico Switch (ZGA002) — the one Zigbee device in the group, an on/off switch.
  • Recessed Door Sensor 7 (ZW187) — a hidden contact sensor that sits inside the door frame.
  • Siren 6 (ZW164) — an audible alarm for security automations.
  • WallMote Quad (ZW130) — a four-button wall controller for scenes and devices.

Five of the nine — the four 8-series sensors plus the SmokeShield — support Z-Wave Long Range, and all five are certified by the Z-Wave Alliance. Aeotec also works directly with Silicon Labs, the company that makes the Z-Wave chips inside its Long Range gear.

Z-Wave Long Range, explained

Z-Wave is a low-power wireless standard built for the smart home. It runs on its own lower frequency, away from the crowded band shared by Wi-Fi, Zigbee, and Thread, which means less interference and more reliable connections. Standard Z-Wave forms a mesh network, where mains-powered devices relay signals and help battery-powered ones save charge.

Z-Wave Long Range takes a different route. Instead of a mesh, it uses a star network: each device talks directly to your adapter. That direct connection delivers a reach of up to 1 km in line of sight, versus around 300 m for standard Z-Wave, so a Water Sensor 8 in the garage or a Door Window Sensor 8 on the garden shed stays connected without repeaters. The direct link also makes sensors more responsive and easier on their batteries, and a single network can hold up to 4,000 devices, compared with 232 on standard Z-Wave.

There is a catch, and it is a modest one: to use the Long Range capability you need a compatible adapter, such as the Home Assistant Connect ZWA-2. With an older adapter, Aeotec’s devices still work, but as regular Z-Wave devices in your mesh network, without the extra reach. Either way, everything runs locally in Home Assistant through the Z-Wave integration, powered by Z-Wave JS, the open-source driver governed by the Open Home Foundation.

Setup and security

Getting the Z-Wave devices onto your network is handled by SmartStart, a Z-Wave feature that adds a device with a quick scan of its QR code. Once joined, S2 — Z-Wave’s built-in encryption — keeps everything each device sends private from the moment it connects.

The new 8-series sensors also move away from coin-cell batteries: according to coverage of the launch, they can be powered over USB-C, which removes one of the small recurring chores of running a sensor network. The MultiSensor 8 is listed at £68 at UK retailer Vesternet.

How the certification was tested

As with every device in the Works with Home Assistant program, the Home Assistant team tested each Aeotec device against its core requirements of local control and privacy. The Z-Wave devices were tested with Home Assistant Container running on an Intel NUC, using the Home Assistant Connect ZWA-2 adapter and the Z-Wave integration. The Pico Switch, the group’s only Zigbee device, was tested on a temporary Zigbee network with a Home Assistant Connect ZBT-2 adapter and the Zigbee Home Automation integration.

The program’s certification agreement requires that devices deliver the functionality users expect within Home Assistant, operate locally without the cloud, and keep doing so long-term. Aeotec has committed to providing long-term support and firmware updates for the certified range.

Why this partnership matters

Aeotec was founded in Silicon Valley in 2006 as Aeon Labs and rebranded as Aeotec in 2016. It later merged with Z-Wave Europe, and it is also the official hardware partner behind the Samsung SmartThings hub. Rather than locking users into a closed ecosystem, the company builds across open standards — Z-Wave, Zigbee, and Matter — so buyers can choose how to set up their smart home.

“At Aeotec, we have always built our products together with the community, not just for it,” said Denis Paetz, President Europe at Aeotec. “Home Assistant is one of the most important pillars of that community, so being part of the Works with Home Assistant program means a great deal to us. It is our commitment that every Aeotec device works reliably, openly and exactly as our users expect.”

The partnership also fits a pattern. Aeotec follows Everything Smart Home, which joined the program in October with its ESPHome-based presence sensors, and LEDVANCE, which joined the same month with 116 certified devices. The Works with Home Assistant list keeps growing, and each addition makes the same pitch: devices that are tested to work locally, with a brand behind them that plans to keep them working.

What it means for your smart home

If you already run Home Assistant with Z-Wave, the practical takeaway is straightforward. The certified Aeotec devices should pair cleanly, expose their full feature set, and keep working without a cloud account — the program’s core promise. If you have been holding off on Z-Wave because of range, the Long Range models are the ones to watch: a single Connect ZWA-2 adapter can now cover a house, a garage, and a garden shed without a mesh of repeaters in between.

And if a device you own is not on the certified list, Home Assistant is clear that this does not mean it is unsupported. It simply has not gone through the team’s testing schedule yet, or does not fit the program’s requirements — it may work perfectly well and be added later.

Aeotec has said it plans to bring more devices into the program, and it will be showing its range at CES in January on the German pavilion. For now, nine certified devices — five of them with kilometre-scale reach — give Home Assistant users a tested, local-first option for the sensors that watch over doors, windows, water, smoke, and climate.

Source: Home Assistant blog, “Aeotec joins Works with Home Assistant,” November 18, 2026.

Leave a Comment