IKEA TIMMERFLOTTE Gets Certified Thread 1.4 Update

IKEA’s budget temperature and humidity sensor is moving up to the latest smart home standards. The Connectivity Standards Alliance (CSA) certified firmware 1.2.2 for the TIMMERFLOTTE sensor on November 17, 2026, bringing the $11.99 device up to Matter 1.5 over Thread 1.4. The certification record reached the Distributed Compliance Ledger (DCL) — the database Matter controllers check for firmware updates — early on November 18 UTC.

Its sibling sensor has not been so lucky. The matching update for the KLIPPBOK water leak sensor, firmware 1.1.1, still had no certification record when Matterhome checked on November 19, leaving KLIPPBOK owners waiting while TIMMERFLOTTE owners get the green light.

What the update changes

IKEA added both firmware versions to the production ledger on November 11, and the release notes for TIMMERFLOTTE and KLIPPBOK list the same four changes: Matter 1.5, Thread 1.4, improved device stability, and a new serial-number attribute. The update first appeared on IKEA’s test network in late September, and the production build carries the same version number and file identifier as the test build posted on September 22 — so anyone who installed the test firmware is already running the production release.

What the update does not do is add features. IKEA lists no new readings or controls for either sensor, and the company has not said which stability problem the updates address, or whether battery life or measurement behavior changes. For owners whose sensors drop off the Thread network, the broad “stability” note is a reason for cautious optimism rather than a guarantee: it is not proof that a specific dropout is fixed.

Why certification matters

Certification is more than a rubber stamp. Some controllers deliver only certified firmware from the ledger, and both Apple and SmartThings document that rule for their hubs. That means TIMMERFLOTTE 1.2.2 now meets the condition for delivery through Apple Home and SmartThings, while KLIPPBOK 1.1.1 does not — at least not yet.

That said, certification does not mean the update is already in your home. Matterhome has not confirmed that Apple Home, Google Home, SmartThings, or Alexa is actually offering either IKEA version yet, so the rollout may take days or weeks to reach your controller.

Thread 1.4: what it means for your network

Thread 1.4’s headline feature is that border routers from different brands can share a single Thread network, ending the era of one isolated mesh per brand. That capability runs in the border routers themselves, though, so updating a sensor leaves your network setup as it is — the sensor update is about the device’s own Matter and Thread stack, not about how your border routers cooperate.

Still, the move matters for the long term. TIMMERFLOTTE is one of the cheapest Matter-over-Thread sensors on the market, and bringing it to the current protocol versions keeps IKEA’s low-cost hardware compatible with the newest hubs and controllers as the standard evolves.

How the update reaches you

How — and when — the update arrives depends on the system your sensor is paired with:

  • DIRIGERA: IKEA says its hub and the smart products connected to it stay updated automatically. The company has not said when these versions reach DIRIGERA homes.
  • Home Assistant: The Matter integration shows an update entity and checks the ledger every 12 hours, and the homeassistant.update_entity action forces an earlier check. Home Assistant’s Matter server does not check the ledger’s certification records before offering an update, so it offers both versions now — including the uncertified KLIPPBOK build.
  • Apple Home: Apple’s Matter update guide makes the home hub the update source. For a Thread sensor, that means an Apple TV or HomePod with Thread, which reads the production ledger. Once the hub offers an update, it installs it itself if automatic updates for other accessories are on in the Home app’s software update settings; otherwise, you tap Update.
  • SmartThings: Hubs install CSA-certified ledger updates once you allow device firmware updates in the hub settings.
  • Google Home: Google says its Matter hubs can deliver updates from the ledger and that a device must be CSA-certified to receive them, without saying whether that applies to each firmware version. A maker registered in Google’s developer console can also choose its own update source.
  • Alexa: Amazon says Alexa can deliver Matter updates from the ledger, but only for makers that regression-test each release with Alexa before publishing it. IKEA has not said whether it does.

Until the CSA certifies KLIPPBOK 1.1.1, Apple Home and SmartThings may hold that update back, and Google Home might too.

A known snag for Home Assistant users

There is one wrinkle worth knowing before you update. Home Assistant currently cannot update a Matter-over-Thread device on a Thread network that includes any Apple border router, such as a HomePod mini or Apple TV 4K. The update fails with the error “Target node did not process the update file.”

If you run Apple and non-Apple border routers side by side, Home Assistant’s troubleshooting steps are to power down the Apple border routers, wait at least 30 minutes, and try again. With Apple border routers only, Home Assistant suggests adding another border router, such as its own — though that makes a mixed network, so the power-down steps still apply. If the sensor is also paired with Apple Home, Home Assistant points to Apple Home as the other update route. By Apple’s documented rule, that route is open to TIMMERFLOTTE 1.2.2 and stays closed to KLIPPBOK 1.1.1 until the CSA certifies it.

What to do now

You do not need to reset, remove, or re-pair a working sensor to get the update — install it when your controller offers it. Where the controller lets you choose, update one sensor first and watch it for a few days before updating the rest. Check that temperature and humidity readings still arrive and that your automations still run. For KLIPPBOK, wet the contacts after updating and confirm that the buzzer sounds and that any phone alert you set up still arrives.

If you installed the 1.2.2 test build through the Matter Server app’s enable_test_net_dcl option, your sensors already run the production build. Turn the option off unless you want IKEA’s and other makers’ test firmware offered as well.

The bigger picture is encouraging: IKEA’s cheapest sensors are keeping pace with the current Matter and Thread standards, and the certification pipeline is working the way it should — TIMMERFLOTTE through, KLIPPBOK queued. For a $11.99 sensor, that is about as good as it gets.

Leave a Comment