Matter Cameras: Only SmartThings Shows Them So Far

A camera can be Matter-certified and still show you nothing

Matter 1.5 defined cameras nearly a year ago. The Connectivity Standards Alliance released the update on November 20, 2025, adding live video and audio streaming over WebRTC, pan-tilt-zoom, detection and privacy zones, and recording to local or cloud storage. On paper, the smart home’s most fragmented category finally had a common language. In practice, almost a year later, only one major platform actually shows a Matter camera.

That gap matters because a camera is not like a light bulb. A bulb needs a simple on-off command that any controller can send. A camera needs a live video stream, a snapshot pipeline, two-way audio, and a privacy mode — and every one of those has to be implemented by the app and hub that commission the device, not just by the camera itself. The Matter logo on the box says the camera speaks the standard. It says nothing about whether your home app can show the picture.

As of this week, the scoreboard looks like this: Samsung SmartThings ships Matter camera support to users. Home Assistant has merged the code into its development branch but has not shipped it in a stable release. Apple Home, Google Home, and Alexa list no camera among the Matter device types they support — and none of the three has published a date for adding one.

SmartThings moved first, and it moved a year ago

Samsung announced Matter camera support on December 18, 2025, making it a fully supported device category in SmartThings. The launch covered live streaming, clip storage, two-way talk, motion detection, event history, and motion and privacy zones. Samsung said the feature works across 58 Matter device types in total, and it named Aqara, Eve, and Xthings as partners shipping Matter cameras in early 2026.

The feature runs on the Aeotec Smart Home Hub 2, the Aeotec Smart Home Hub, the SmartThings Hub 2018, and the ThingsOne Smart Home Hub. Owners of the older SmartThings Hub 2015 were told updates would come during 2026. That makes SmartThings the only place today where buying a Matter-certified camera and opening your usual home app produces a live picture — the use case the whole standard was supposed to deliver.

Home Assistant merged the code in October — that is not the same as shipping it

The change that moved the story this autumn came from open source. Home Assistant’s pull request #176080, “Support Matter cameras”, was merged into the development branch at 01:01 UTC on October 22, 2026, after fifteen weeks open. It adds a camera platform built on the Camera AV Stream Management and WebRTC Transport Provider clusters, implements Home Assistant’s native WebRTC API with signalling relayed through the Matter server, takes JPEG snapshots, maps the camera’s privacy-mode attributes to the entity’s on/off state, and forwards configured ICE servers — including Nabu Casa’s TURN server where available — to the camera.

The merge depended on the Open Home Foundation’s matter.js server version 1.5.0, released on October 20, which added the camera API that manages stream allocation and WebRTC sessions, along with new error codes for camera failures and a talkback option for two-way audio. The camera platform only appears when the Matter server reports WebSocket schema 14 or higher, which arrived with that same release.

But the code exists in the branch Home Assistant builds from, not in the version running on your Raspberry Pi today. Home Assistant versions its feature releases monthly, so the earliest a typical install sees Matter cameras is the next monthly release — and the project has not announced which release that will be. If you run Home Assistant, the sensible move is to wait for a stable release and keep whatever RTSP or vendor integration you have working in the meantime.

The big three still say nothing

The absences are explicit, not inferred. Google’s supported-device table, last updated on October 8, 2026, lists 32 device types from Air Purifier to Window Covering, then states plainly: “Device types other than the ones listed here are not officially supported in the Google Home ecosystem.” Google does list a Doorbell type, but it is built on the Switch cluster — a button press, not a video stream.

Apple’s Matter accessory page, published May 7, 2026, enumerates “air conditioners, bridges, lights, locks, outlets, switches, thermostats, blinds and shades, and sensors.” No camera, no video doorbell, and no published date for adding them. Amazon’s Matter support documentation, last modified May 1, 2026, lists hubs, lighting and plugs, buttons, sensors, closures, thermostats, fans, air purifiers, appliances, and robot vacuums, and points to a separate page for the full device list. Cameras are not on it.

This is the same pattern the XDA Developers analysis of Matter’s one-app promise described this week: the standard has done its job, but nothing obliges a platform to support each device type, or to do it on any schedule. Matter 1.0 covered lights, plugs, locks, and thermostats in October 2022; version 1.2 added robot vacuums and appliances; version 1.3 brought energy reporting in May 2024; version 1.5 added cameras in November 2025. The logo part works. The one-app part still depends on which app you use.

Even when the stream starts, it is early days

The matter.js server’s own camera limitations document, shipped with the October 20 release, is the most honest account yet of where Matter cameras stand. Browser live views are capped at 1280×720, because browsers decode H.264 level 3.1 at most, so the server never requests video the viewer cannot decode. The default frame rate is 30 frames per second, and one tested camera accepted 640×480 at 90 fps and then sent black video.

Stream setup is a negotiation: the server starts at 8 Mbit/s and halves the bit rate, then lowers frame rate, then picture size, using at most 32 requests per start. Camera capacity is shared, so starting a stream can reuse, shrink, or free an existing one — which can cost another controller its stream — while refusing eviction can fail the request instead. Snapshots taken while a live view is running can come back smaller or with overlays, flagged as degraded. TURN over TLS needs the camera’s UTC clock to be set, which is often not the case right after a reboot. And talkback works only when an audio stream is present.

None of that is a reason to avoid Matter cameras. It is the reason a vendor’s “Matter 1.5 certified” badge tells you less than you think — and why you should test live view, snapshots, and two-way audio on your own controller inside the return window before committing.

What to do this week

The advice depends entirely on which platform runs your home:

  • SmartThings users: Matter cameras are a real choice today. Start with the brands Samsung named — Aqara, Eve, and Xthings — and check that your hub is one of the models that carries the feature.
  • Apple Home, Google Home, or Alexa users: paying extra for the Matter logo on a camera buys you nothing right now. Choose on the vendor’s own app and integration, and treat Matter support as upside for later.
  • Home Assistant users: wait for a stable release rather than a development branch, and keep your existing RTSP or vendor integration running until then.
  • Everyone shopping: the check that matters takes one minute. Open your home app’s own supported-device list, look for the word “camera,” and check the date on the page. The rest, until a platform ships it, is a press release.

Matter cameras will eventually be ordinary. The standard is written, the first platform shipped it a year ago, and the second is weeks away from a stable release. But the lesson of the last year is that a standard and a feature are different things — and for three of the four biggest smart home platforms, cameras are still only a standard.

Leave a Comment